Threadlockers

Permatex High Temperature Sleeve Retainer

$44.80$60.30save 26% vs MSRP· 36 mL (1.22 fl oz) bottle

Part no. PX-64040 · Permatex part no. 64040 · price in CAD

Available next day — free pickup in Edmonton, or we ship it. Live Canada Post & UPS rates in the cart · $15 local delivery in Edmonton · free pickup at 12940 53 St NW.

100% genuine. 100% genuine Permatex, from authorized North American distribution.

A green, high-temperature anaerobic retaining compound for securing sleeves, studs, pins and other slip- or press-fit metal parts, and for restoring fit to worn or out-of-tolerance assemblies. It hardens when confined between close-fitting metal parts, suits diametral gaps up to 0.18 mm (0.007 in.) and is rated from -54°C to 204°C (-65°F to 400°F). For metal parts only; cured parts need heat before they will come apart.

Permatex High Temperature Sleeve Retainer is a one component, solvent-free, fast curing, anaerobic adhesive/sealant. It is a green colored liquid resin that hardens and cures in the absence of air. Permatex High Temperature Sleeve Retainer self-hardens into a tough plastic material when it is confined between close-fitting metal parts. The cured adhesive is a thermoset plastic suitable for exposure to most solvents and engine fluids. OEM Specified. Meets or exceed the requirements of Military Specification Mil-R-46082B, Type II.

✓High temperature, up to 400°F (204°C), anaerobic adhesive
✓Secures slip and press fit assemblies
✓Adds up to 3,000 PSI holding power
✓Restores fit to worn or out-of-tolerance assemblies
✓Prevents surface corrosion

Size

30-day returns · Secure Stripe checkout · 100% genuine · (780) 482-2424

⚠ Safety warnings

SDS (Rev 10-Feb-2025): Danger. Harmful if inhaled. Causes skin irritation. Causes serious eye irritation. May cause cancer. May cause damage to organs through prolonged or repeated exposure.
Card: WARNING: MAY CAUSE ALLERGIC SKIN REACTION. Read carefully other cautions on back.
NOTE: High Temperature Sleeve Retainer works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured High Temperature Sleeve Retainer by heating above 500°F (260°C); then use presses or pullers to separate components.
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
California Proposition 65: WARNING Cancer. www.P65Warnings.ca.gov

Safety data sheet (SDS) →

Specifications & Approvals

Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type II). Chemical Type: Anaerobic Dimethacrylate Ester; Appearance: Green liquid; Specific Gravity @ 77°F: 1.12; Viscosity, cps: 500 - 700; Flash Point, COC, °F: >200°F; Cure Speed: Hardens in 4 hours, Full cure in 24 hours. Performance of cured material: Temperature Resistance - -65°F to 400°F; Corrosivity - None (Slightly acidic, may discolor some metals.); Dielectric Strength - 250 volts/mil. For use on assemblies with gaps up to 0.007" diametral.

Common questions

Is this genuine Permatex High Temperature Sleeve Retainer?

Yes. 100% genuine Permatex, from authorized North American distribution. Everything we sell is genuine product — never grey-market.

Can I get it shipped or pick it up in Edmonton?

Both. Choose Ship to me for live Canada Post or UPS rates shown in the cart before you pay, Local delivery in Edmonton for $15, or free pickup at our Edmonton shop.

Not sure this is the right threadlockers for your vehicle?

Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.