Brake Lubricant

AGS Sil-Glyde Silicone Brake Lubricant

$25.15$31.64save 21% vs MSRP· 113.5 g (4 oz) tube

Part no. AG-BK-4 · AGS part no. BK-4 · price in CAD

Special order — not on our shelf. Email or call (780) 482-2424 for stock and ETA. Live Canada Post & UPS rates in the cart · $15 local delivery in Edmonton · free pickup at 12940 53 St NW.

100% genuine. 100% genuine AGS, from authorized North American distribution.

A silicone brake lubricant from AGS's Sil-Glyde line in a 113.5 g (4 oz) tube, for caliper slide pins and boots, pad backing plates and shims, and other brake hardware contact points. AGS says it is rubber-safe, compatible with brake fluids and moisture- and heat-resistant from -29 °C to 218 °C, and it can also be used when rebuilding calipers and wheel cylinders. Keep it off the pads, rotors and drum braking surfaces.

Give every brake job a noise-free, corrosion-proof finish with Sil-Glyde® Silicone Brake Lubricant — the high-temperature silicone brake grease trusted by professional technicians and DIY mechanics alike. Formulated to dampen vibration and seal out moisture, Sil-Glyde keeps caliper pins, pad backing plates, shims, and slides gliding smoothly well beyond break-in. The rubber-safe silicone formula won’t swell or degrade EPDM and nitrile seals, and it stands up to 425°F rotor heat without burning off — so hardware stays protected and comes apart cleanly at the next service.

✓Stops brake squeal & vibration — dampens the high-frequency vibration between pad and caliper that causes noise.
✓Rubber-safe silicone — won't swell, soften, or degrade EPDM, nitrile, or caliper boots the way petroleum greases can.
✓High-temperature protection — holds up to 425°F rotor heat without melting or burning off.
✓Corrosion & moisture seal — keeps slide pins and hardware from seizing between services.
✓Long service life — one thin film lasts well beyond brake break-in.
✓SIL-GLYDE® is compatible with brake fluids and can also be used in the rebuilding of calipers and wheel cylinders.

Size

30-day returns · Secure Stripe checkout · 100% genuine · (780) 482-2424

⚠ Safety warnings

Never apply Sil-Glyde to the pad friction material, the rotor or drum surface, or anywhere it could migrate onto the braking surface. Keep it on the hardware and contact points only.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specifications & Approvals

Label: SIL-GLYDE® Brake Lubricant; BK-4; Net Wt.: 4 oz / 113.5 g; Moisture proof and heat resistant, performance range -20°F (-29°C) to 425°F (218°C); Made in the USA | Maker store: Tube, 4 oz; SKU BK-4

Recommended for vehicles requiring

USES: All metal-to-metal contact points; Caliper Pins and Slides; Sleeves, grommets and boots; O-Rings and seals; Rebuilding wheel cylinders and calipers. Where to Use It: Caliper slide / guide pins and their boots; Pad backing plates, ears, and abutment clips; Anti-rattle shims and hardware; Drum-brake shoe contact points and self-adjuster threads; Caliper piston boots and dust seals (rubber-safe)

Treat rate

Apply a thin, even film to slide pins, pad ears, shims, and backing plates.

Common questions

Is this genuine AGS Sil-Glyde Silicone Brake Lubricant?

Yes. 100% genuine AGS, from authorized North American distribution. Everything we sell is genuine product — never grey-market.

Can I get it shipped or pick it up in Edmonton?

Both. Choose Ship to me for live Canada Post or UPS rates shown in the cart before you pay, Local delivery in Edmonton for $15, or free pickup at our Edmonton shop.

Not sure this is the right brake lubricant for your vehicle?

Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.