Grease

Red Line CV-2 Grease with Moly

$22.15$26.52save 16% vs MSRP· 397 g (14 oz) tube

Part no. RL-80402 · Red Line part no. 80402 · price in CAD

Special order — not on our shelf. Order it and we bring it in, then call you with timing. Shipping AB/SK/MB $30 · ON/QC $40 · NT $50 (base FREE over $150).

100% genuine. 100% genuine Red Line, from authorized North American distribution.

A synthetic, non-soap NLGI #2 extreme-pressure grease with moly, made for the high temperatures and loads in high-performance wheel bearings, U-joints and high-angle CV joints. It carries the NLGI GC-LB service rating, has a useful temperature range of -100 °F to 500 °F (about -73 °C to 260 °C), and resists water washout. It darkens after high-temperature use, which does not affect performance.

✓Outperforms the best conventional or synthetic greases and lubes
✓Withstands extreme temperature and pressure in wheel bearings, U-joints and high-angle CV Joints
✓Excellent high-temp stability, extreme-pressure protection and water resistance
✓Used in a variety of applications with operating temps from -100°F to 500°F
✓Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
✓Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
✓Synthetic fluidity allows increases in bearing life up to 200%
✓Will darken after high-temp use-not detrimental to performance

Size

30-day returns · Secure Stripe checkout · 100% genuine · (780) 482-2424

⚠ Safety warnings

Warning: This product can expose you to chemicals including Quartz (14808-60-7) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.
Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease.
For health safety information, please refer to the Safety Data Sheet at REDLINEOIL.COM

Safety data sheet (SDS) →

Specifications & Approvals

NLGI Grade #2; NLGI Service GC-LB; Thickener Non-Soap; Fluid Type Thermally-stable synthetic; Useful Temperature Range -100°F to 500°F; Color Red; Dropping Point, >800°F; 4-Ball Wear (ASTM D-4172B) 0.46; 4-Ball Weld (ASTM D-2783) 400 Kg; Load/Wear Index (ASTM D-2783) 71.1; Water Washout @ 105°F 1%; Evaporation Loss, 22 hrs @ 350°F 4%; Oil Separation, 30 hrs @ 350°F 5%; Oxidation Stability, 500 hrs @210°F, ∆psi 1.75 (12 kPa); Rust Test, ASTM D1743 Pass

Recommended for vehicles requiring

Wheel bearings, U-joints and high-angle CV joints; High-performance wheel bearings and CV-joints; Chassis lubrication; Industrial: high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms and applications where vibrations can cause fretting wear and corrosion

Common questions

Is this genuine Red Line CV-2 Grease with Moly?

Yes. 100% genuine Red Line, from authorized North American distribution. Everything we sell is genuine product — never grey-market.

Can I get it shipped or pick it up in Edmonton?

Both. Choose ship-to-me for delivery (AB/SK/MB $30 · ON/QC $40 · NT $50, base rate free over $150), or select pickup at checkout and collect it at our Edmonton shop.

Not sure this is the right grease for your vehicle?

Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.