Adhesives & Epoxy

Permatex 5 Minute Epoxy Gel

$12.60$14.05save 10% vs MSRP· 25 mL dual syringe

Part no. PX-84101 · Permatex part no. 84101 · price in CAD

Special order — not on our shelf. Order it and we bring it in, then call you with timing. Shipping AB/SK/MB $30 · ON/QC $40 · NT $50 (base FREE over $150).

100% genuine. 100% genuine Permatex, from authorized North American distribution.

A two-part, general-purpose epoxy gel in a 1:1 dual syringe. The resin carries a blue dye that disappears once resin and hardener are fully mixed, so you can see when it is ready to apply. It sets in 5 minutes, dries clear without clamping and reaches usable strength in four hours at 22°C (72°F); it will not bond most polyethylene or polypropylene plastics.

Permatex's General Purpose 5 Minute Gel Epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a Blue Dye Indicator that disappears when it's fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of "ready to use".

✓General purpose epoxy with non-drip gel formula for mess free application
✓Blue dye indicator disappears when epoxy is ready to apply
✓Permanent strength up to 3400 PSI strength
✓Dries clear and no clamping required
✓Water resistant, non-shrinking formula
✓Fills gaps
✓Impact resistant

Size

30-day returns · Secure Stripe checkout · 100% genuine · (780) 482-2424

⚠ Safety warnings

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as an adhesive for chlorine or other strong oxidizing materials.
SDS (resin 84101R): Warning. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction.
Wear protective gloves, protective clothing, eye protection and face protection.
Work area must be protected from accidental spills.
California Proposition 65: WARNING Cancer. www.P65Warnings.ca.gov

Safety data sheet (SDS) →

Specifications & Approvals

Temperature range -60F to +180F (-51C to 82C), Permanent strength up to 3400 PSI strength, Mix ratio (volume) 1:1, 84101 Working Time: 4 – 5 minutes, 84101 Fixture Time: 8 – 10 minutes, Usable strength is reached in four hours at 72°F (22°C). Cooler temperatures may require longer set time, NOTE: Epoxy sets in 5 minutes and may be handled in 15 minutes, Final color Clear to slightly yellow, Appearance: Resin Blue Gel; Hardener Clear to Yellow Gel, Chemical Type Epoxy and Mercaptan/Amine Resins, Specific Gravity 1.10 - 1.17, Flash Point, TCC >200°F

Recommended for vehicles requiring

Complex, multi-piece assemblies, Ceramic, Chrome, Fabric, Fiberglass, Glass, Hard plastic (excluding polyethylene and polypropylene), Metal, Rubber

Treat rate

Mix ratio (volume) 1:1. Depress plunger evenly to dispense equal amounts of resin and hardener; thoroughly mix on a clean discardable surface until blue dye indicator disappears and epoxy is a uniform color.

Common questions

Is this genuine Permatex 5 Minute Epoxy Gel?

Yes. 100% genuine Permatex, from authorized North American distribution. Everything we sell is genuine product — never grey-market.

Can I get it shipped or pick it up in Edmonton?

Both. Choose ship-to-me for delivery (AB/SK/MB $30 · ON/QC $40 · NT $50, base rate free over $150), or select pickup at checkout and collect it at our Edmonton shop.

Not sure this is the right adhesives & epoxy for your vehicle?

Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.