Automatic Transmission Fluid

CAM2 ATF D/M Dexron III(H)/Mercon

$13.40$14.96save 10% vs MSRP· 946 mL (1 US qt)

Part no. CM-80565-309 · CAM2 part no. 80565-309 · price in CAD

Available next day — free pickup in Edmonton, or we ship it. Live Canada Post & UPS rates in the cart · $15 local delivery in Edmonton · free pickup at 12940 53 St NW.

100% genuine. 100% genuine CAM2, from authorized North American distribution.

A multipurpose automatic transmission fluid from CAM2 for transmissions that call for a DEXRON III H, DEXRON III G, DEXRON IIE, MERCON or Type A Suffix A fluid, in a 946 mL (1 US qt) bottle. CAM2 also recommends it for many powershift and hydrostatic transmissions and for hydraulic systems that need good low-temperature flow. CAM2 says it cannot be used where DEXRON VI is required and excludes transmissions that need Ford Type F, Mercon V or Chrysler MS-9602 or MS-7176 fluid, so check your owner's manual first.

CAM2 ATF D/M is a multipurpose automatic transmission fluid especially designed to meet the service requirements of a wide variety of applications. CAM2 ATF D/M is designed for newer generation, electronically controlled transmissions. It is suitable for use in transmissions built by General Motors, Daimler Chrysler, Ford (except where Type F required), and most foreign manufacturers, where a DEXRON® III H, DEXRON® III G, DEXRON® IIE, MERCON®, or Type A Suffix A performance level transmission fluid is specified.

✓Superior cold temperature performance characteristics
✓Wide range of seal compatibility
✓Excellent wear protection and oxidation resistance
✓Fortified against rust and corrosion
✓Meets requirements for foam protection
✓Superior frictional characteristics with excellent friction retention and smooth shifting
✓Superior to 10W engine oils commonly used in mobile hydraulics
✓Broad range of applications
✓With an operating temperature range between -40 °F to 320 °F, D/M meets most major hydraulic manufacturers' requirements for anti-wear hydraulic fluids. It is suitable for use with Sundstrand, Bosch-Rexworth, Vickers, and Denison (except certain axial pumps) hydraulic pumps.

Size

30-day returns · Secure Stripe checkout · 100% genuine · (780) 482-2424

⚠ Safety warnings

*CAM2 ATF D/M Automatic Transmission Fluid cannot be used in GM transmissions requiring the use of DEXRON® VI automatic transmission fluid. CAM2 ATF DEXRON® VI should be used in these applications. Always consult your owner's manual for recommendations.
Classification (GHS-US): Not Classified
P273 - Avoid release to the environment.
P501 - Dispose of contents/container in accordance with local, regional, national, and international regulations.

Safety data sheet (SDS) →

Specifications & Approvals

CAM2 ATF D/M recommended for applications requiring: DEXRON® III H, DEXRON® III G, DEXRON® IIE, MERCON®, or Type A Suffix A; MERCON®, M2C138-CJ or M2C 166-H Fluids; When Allison C-4 Fluids and Caterpillar TO-2 Fluids; BMW & VW 4- & 5-speed automatic transmissions; MB 236.1/.5/.6/.7; Honda Z1; JASO 1A; MAN 339 Z-1; Mitsubishi SP-II, SP-III; Nissan Matic D, J; Toyota T-III, T-IV; Voith 55.6335; ZF TE-ML-14A. CAM2 ATF D/M meets the performance requirements of Allison Transmission Division C-4 and V-730D specifications for transmission/torque converter fluids. Technical data (product code 309): Gravity, API 32; Pounds per Gallon 7.2; Flash Point, COC 365 °F (185 °C); Fire Point, COC 428 °F (220 °C); Viscosity cSt at 40°C 32.8; at 100°C 7.2; Viscosity cP at -40°C 17,500; at -20°C 1,150; Viscosity Index 192; Pour Point -54 °F (-48 °C); Color Red

Recommended for vehicles requiring

It is suitable for use in transmissions built by General Motors, Daimler Chrysler, Ford (except where Type F required), and most foreign manufacturers, where a DEXRON® III H, DEXRON® III G, DEXRON® IIE, MERCON®, or Type A Suffix A performance level transmission fluid is specified. CAM2 ATF D/M can also be used in: Chrysler transmissions except where Chrysler MS-9602 or MS-7 176 is required (top-off is acceptable); All 1979 or newer transmissions built by Ford (exceptions: Ford FMX and pre-1980 C-4 transmissions and where Mercon V is required); Hydraulic and compressor systems where low temperature flowability is required; Many powershift transmissions, torque converters and hydrostatic transmissions

Common questions

Is this genuine CAM2 ATF D/M Dexron III(H)/Mercon?

Yes. 100% genuine CAM2, from authorized North American distribution. Everything we sell is genuine product — never grey-market.

Can I get it shipped or pick it up in Edmonton?

Both. Choose Ship to me for live Canada Post or UPS rates shown in the cart before you pay, Local delivery in Edmonton for $15, or free pickup at our Edmonton shop.

Not sure this is the right automatic transmission fluid for your vehicle?

Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.