Engine Flush
Liqui Moly Pro-Line Engine Flush
Part no. LM-7712 · Liqui Moly part no. 7712 · price in CAD
In stock — free pickup in Edmonton, or we ship it. Shipping AB/SK/MB $30 · ON/QC $40 · NT $50 (base FREE over $150).
Authorized stockist. We're an authorized Liqui Moly stockist.
A pre-oil-change engine flush for 4-stroke gasoline and diesel engines, with or without turbochargers. One 500 mL can treats 3 to 5 L of warm engine oil; let the engine idle 10 to 15 minutes, then change the oil and filter. It is safe with catalytic converters and particulate filters but is not for motorcycles.
A highly effective formulation designed for quick and safe removal of deposits in engines before an oil change. Optimizes oil consumption, guarantees proper oil pressure in hydraulically activated systems and ensures proper oil flow after a cold start. Allows the fresh oil to immediately develop full performance while restoring full engine performance and reducing exhaust emissions.
- ✓highly economical
- ✓suitable for diesel particulate filters
- ✓does not attack common sealing materials
- ✓tested for turbochargers and catalytic converters
- ✓gentle cleaning
- ✓simple to use
- ✓rapid cleaning
Size
30-day returns · Secure Stripe checkout · Authorized stockist · (780) 482-2424
⚠ Safety warnings
- Not suitable for use on motorbikes.
- WARNING: This product can expose you to chemicals including naphthalene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- DANGER: POISON
- SDS (OSHA HCS 2024 / WHMIS 2015 rev 2022) signal word: Danger. H227 - Combustible liquid. H304 - May be fatal if swallowed and enters airways. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation.
- SDS: P331 - Do NOT induce vomiting. P301+P310 - If swallowed: Immediately call a POISON CENTER, a doctor.
Specifications & Approvals
Color / appearance: yellow, brown, Base: additive, carrier liquid, Flash point: 145 °F DIN ISO 2592, Pour point: -49 °F DIN ISO 3016, Form: liquid, Viscosity at 104 °F: <7 mm²/s, Odor: characteristic
Recommended for vehicles requiring
For all 4-stroke gasoline and diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF/DPF). Compatible with most commercially available motor oils and in oil running belt.
Treat rate
One full can (500 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter.
Common questions
Is this genuine Liqui Moly Pro-Line Engine Flush?
Yes. We're an authorized Liqui Moly stockist. Everything we sell is genuine product — never grey-market.
Can I get it shipped or pick it up in Edmonton?
Both. Choose ship-to-me for delivery (AB/SK/MB $30 · ON/QC $40 · NT $50, base rate free over $150), or select pickup at checkout and collect it at our Edmonton shop.
Not sure this is the right engine flush for your vehicle?
Check your owner's manual for the required specification or call our Edmonton team at (780) 482-2424 and we'll match the right product to your vehicle.
More engine flush
Not sure what you need? Call (780) 482-2424 and we'll match it to your vehicle.
Want it installed? See our Oil Change service in Edmonton.
Authorized stockist. We're an authorized Liqui Moly stockist. Never grey-market. How Liqui Moly fights counterfeits →